If the problem persists after trying the following, contact your Agilent field service engineer or representative.
Error Message |
Instrument action and status LED |
Explanation |
Remedy |
Error initializing serial port device (errno %d) Error reading data from serial port device (errno %d) Error writing data to serial port device (errno %d) |
N/A |
An error has been detected with the instrument Autosampler (serial) port. |
Retry the operation |
The instrument operation has become unstable. |
Restart the instrument from the front power button. |
||
There is a problem with the serial cable connection to the instrument. |
Remove connected device from the serial port. |
||
There is a fault with the autosampler. |
Consult the documentation that came with the autosampler. |