 |
Advanced Dilution System 2 (ADS 2)
The ADS 2 provides real time, inline sample dilution including reactive dilution, fixed dilutions and automated calibration curve creation from diluted stock standard solution.
|
|
SPS 4 Autosampler
The SPS 4 autosampler has a state-of-the-art design and is the latest generation of autosamplers from Agilent. The Agilent SPS 4 is a random access, single probe, dual rinse autosampler, providing front-end automation for several Agilent instruments.
|
|
SPS 3 Sample Preparation System
With the Agilent SPS 3, over 500 solutions may be analyzed automatically without operator intervention.
|
|
prepFAST Autodilution System
Real time, inline sample dilution and autosampler.
|
|
ESI Autosampler
Clean, high-speed sample changers capable of holding a wide variety of sample racks and vials in a flexible layout.
|
|
Dusty Environment Inlet Filter
A heavy duty filter for use in dusty environments.
|
|
External Inlet Duct Adapter
The External Inlet Duct Adapter provides an attachment for ducting air into the air inlet port, for use in labs with harsher environments.
|
|
Gas Manifold Upgrade
Three gas manifold options are available including a single gas Ar option, two gas Ar and O2, and a three gas Ar, O2 and N2 option.
|
|
IsoMist Programmable Temperature Spray Chamber
The IsoMist Programmable Temperature Spray Chamber provides electrical cooling or heating to the spray chamber.
|
|
Advanced Valve System (AVS) 6 and 7
The AVS 6/7 has a 6 or 7 port switching valve, helping to increase productivity and precision of your analysis.
|
|
Advanced Valve System (AVS) 4
The AVS 4 has a 4 port switching valve, helping to increase productivity and precision of your analysis.
|
|
5-channel Peristaltic Pump
The five channel peristaltic pump can be used for additional solution introduction and is required when using the MSIS accessory.
|
|
Multimode Sample Introduction System (MSIS)
The MSIS is used with the ICP-OES instrument to simultaneously measure very low trace concentrations of several hydride forming elements.
|
|
Argon Humidifier
The Argon Humidifier is commonly used when running aqueous samples with high dissolved solids or high dissolved salt content. When using the accessory, the nebulizer gas flow is passed through the humidifier to increase the water vapor in the gas. This has been found to be beneficial by reducing the build-up of salt and other dissolved solids in the sample introduction system. By reducing blockages, the Argon Humidifier helps to ensure uninterrupted, maintenance-free operation.
|