How To

Set up the Instrument

• Assemble and disassemble the semi-demountable torch
• Setup the sample introduction area for use
• Perform a detector and instrument calibration
• Configure the ICP-OES IP address
• Retrieve the ICP-OES IP address or reset the web utility password

Load a Worksheet

• Create a new worksheet
• Create a new worksheet from a template
• Open a worksheet

Setup a Method

• Setup a method overview
• Setup and run a method

Report Your Results

• Generate and print a report 
• Preview a report 
• Export results
• Design a report using Intelligent Reporting
• Export and Import IntelliQuant Files

Maintenance and Troubleshooting

• Perform maintenance procedures
• Troubleshoot issues

Software How To

• Enable worksheet options
• Enable instrument options
• Set default preferences for all worksheets
• Enable Neb Alert
• About IntelliQuant
• IntelliQuant method setup
• IntelliQuant Screening setup
• Create a new IntelliQuant calibration
• Export and Import IntelliQuant files
• Troubleshoot IntelliQuant imports
• Setup and create a report
• Perform a read
• Perform a time scan
• Change default folder locations
• Enable and use the chiller
• Design a report using Intelligent Reporting
• Access and export operations logs
• How to create and use Applets
• Import files from ICP Expert II
• Import and export samples and data
• Configure the ICP-OES IP address
• Connect the ICP-OES to the software
• Retrieve IP address or reset password
• Edit and create new units
• Enable and set passwords
• Enable and setup Intelligent Rinse
• View instrument status
• Manually control components
• Add drift correction lines
• Set the fast pump speed
• Ignition page parameters
• Create and Reset maintenance counters

Install and Assemble Hardware

• Semi-demountable torch assembly and disassembly
• Install the snout
• Install the cone
• Install the spray chamber
• Assemble the nebulizer
• Install the nebulizer
• Install the peristaltic pump
• Replace and adjust the peristaltic pump tubing
• Replace the gas manifold
• Replace the ADS 2 tubing
• Replace the AVS 4/6/7 tubing
• Replace the AVS 4/6/7 rotor
• Replace the AVS 4/6/7 valve body/stator

Install Accessories

• ADS 2
• SPS 4 autosampler
• SPS 3 autosampler
• ESI autosampler
• Dusty environment inlet filter
• External inlet duct adapter
• 5 channel peristaltic pump
• Upgrade the gas manifold
• Switching valve systems:
  • AVS 6/7
  • AVS 4
• Multimode sample introduction system (MSIS)
• Argon humidifier